Need help?Do you have a question about the Dell Networking N3024F and is the answer not in the manual?
General| Model | N3024F |
|---|---|
| Ports | 24 |
| Total Ports | 24 |
| SFP+ | Yes |
| SFP Slots | 4 |
| Switching Capacity | 88 Gbps |
| Forwarding Rate | 65.5 Mpps |
| MAC Address Table Size | 16, 000 entries |
| Jumbo Frame Support | 9216 bytes |
| Manageable | Yes |
| Form Factor | Rack-mountable |
| Power Supply | Internal |
| Dimensions | 1.7" height |
| Weight | 5.07 kg |
| Operating Temperature | 0 to 45°C |
Describes the Dell PowerEdge M1000e Blade Chassis and its expansion module slots.
Details the Dell Networking M8024-k blade switch and its available 10G Ethernet expansion modules.
Outlines the Dell Networking M8024 blade switch and the expansion modules it supports.
Details the Dell Networking M6220 blade switch and its available 1G Ethernet expansion modules.
Explains the Dell Networking MXL blade switch and its supported 10/40G Ethernet expansion modules.
Details the Dell Networking M6348 switch, noting it does not support expansion modules.
Describes the Dell Networking N3000 Series rack switches and their supported 10GBASE-T and SFP+ modules.
Details the Dell Networking N4000 Series rack switches and their supported 10GBASE-T, SFP+, and 40G QSFP modules.
Explains the Dell Networking 8100 Series rack switches and their use for stacking and expansion modules.
Details the Dell Networking 7000 Series rack switches with two bays for expansion modules.
Describes the Dell Networking 62xx Series switches and their two bays for expansion modules.
To Next Page