Need help?Do you have a question about the Dell Networking N4032F and is the answer not in the manual?
General| Switching Capacity | 1.28 Tbps |
|---|---|
| Forwarding Rate | 952 Mpps |
| Rack Units | 1U |
| Form Factor | Rack-mountable |
| Layer | Layer 3 |
| Power Supply | Dual, hot-swappable |
| MAC Address Table Size | 128K entries |
| Management | CLI, SNMP, Web |
| VLAN Support | Yes |
| Ports | 24 x 10 Gigabit Ethernet SFP+ + 2 x 40 Gigabit Ethernet QSFP+ |
Overview of the Dell PowerEdge M1000e Blade Chassis, detailing its six slots for expansion modules.
Details on the Dell Networking M8024-k blade switch and its available 10G SFP+, 10GBase-T, and CX4 expansion modules.
Details on the Dell Networking M8024 blade switch and its available 10G SFP+, 10GBase-T, and CX4 expansion modules.
Details on the Dell Networking M6220 blade switch and its supported expansion modules like SFP+, 10GBase-T, CX4, and XFP.
Details on the Dell Networking MXL blade switch and its supported 10G SFP+, 40G QSFP, and 10GBase-T expansion modules.
Information on the Dell Networking M6348, noting it has no expansion slots but offers other port types.
Details on the supported 10BBASE-T and SFP+ expansion modules for the Dell Networking N3000 series.
Details on the supported 10GBASE-T, 4x SFP+, and 2x 40G QSFP expansion modules for the N4000 series.
Details on the supported 10G SFP+, 40G QSFP, and 10GbaseT expansion modules for the Dell Networking 8100 series.
Details on the supported 10G SFP+, 10GBase-T, and CX4 stacking modules for the Dell Networking 7000 series.
Details on the supported SFP+, 10GBase-T, CX4, and XFP expansion modules for the Dell Networking 62xx series.
To Next Page