Dell Networking N3024 User Manual

11 Expansion Modules for Dell Networking Switches
3.1.3 Dell Networking M6220
Figure 4 Dell Networking M6220 Blade Switch (1G Ethernet) and Available Modules
The Dell Networking M6220 switch supports the same expansion modules as the Dell Networking 6224, 6224P,
6224F, 6248, and 6248P switches. The stacking module only installs in Bay 1 (left bay). The 10GBase-T module only
installs in Bay 2 (right bay).
Both the stacking module and 10GE CX4 module can be configured for either role (Ethernet or Stacking). By default,
each module functions according to its module ID. Upon changing the role of a module, a reboot is required for the
change to take effect. See the 62xx Command Line Interface Guide for instructions on how to change roles.

Dell Networking N3024 Specifications

General

Device Type	Switch
Enclosure Type	Rack-mountable
MAC Address Table Size	16, 000 entries
Power Supply	Internal power supply
Rack Units	1U
Operating Temperature	0 °C to 45 °C
Ports	24 x 10/100/1000
Routing Protocol	OSPF, RIP
Remote Management Protocol	SNMP 1
Features	VLAN support, QoS, IGMP snooping, port mirroring, DHCP snooping, ACLs
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab
Jumbo Frame Support	Yes
Storage Temperature	-40 °C to 65 °C
Operating Humidity	10 to 90% (non-condensing)
Storage Humidity	5% to 95% (non-condensing)