6. Connect the power and CD/DVD drive cables to the drive and to the system board.
7. Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents.
8. Replace the computer cover.
9. Update your configuration information in system setup by setting the appropriate Drive option (0 or 1) under Drives.
10. Verify that your computer works correctly by running the Dell Diagnostics.
Back to Contents Page
NOTE: The CD/DVD drive cable may be a SATA cable and appear differently than the image below. For information on SATA cable connectors, see
"General Installation Guidelines."
To Next Page
Loading...
