Table 24. Intel Software Guard Extensions (continued)
Option Description
● 32 MB
● 64 MB
● 128 MB—Default
Performance
Table 25. Performance
Option Description
Multi Core Support
This field specifies whether the process has one or all cores
enabled. The performance of some applications improves with
the additional cores.
● All—Default
● 1
● 2
● 3
Intel SpeedStep
Allows you to enable or disable the Intel SpeedStep mode of
processor.
● Enable Intel SpeedStep
This option is set by default.
C-States Control
Allows you to enable or disable the additional processor sleep
states.
● C states
This option is set by default.
Intel TurboBoost
Allows you to enable or disable the Intel TurboBoost mode of
the processor.
● Enable Intel TurboBoost
This option is set by default.
Hyper-Thread Control
Allows you to enable or disable the HyperThreading in the
processor.
● Disabled
● Enabled—Default
Power management
Table 26. Power Management
Option Description
AC Recovery Determines how the system responds when AC power is re-applied after a power loss. You
can set the AC Recovery to:
● Power Off
● Power On
● Last Power State
This option is Power Off by default.
Enable Intel Speed Shift
Technology
Allows you to enable or disable Intel Speed Shift Technology support. The option Enable
Intel Speed Shift Technology is set by default.
BIOS setup 29
To Next Page
Loading...
