1. LVDS connector 2. processor socket
3. camera connector 4. WLAN connector
5. coin-cell battery 6. jumper connector
7. jumper connector 8. jumper connector
9. memory connectors (SODIMM sockets) 10. speaker connector
11. jumper connector 12. intrusion-switch connector
13. hard-drive connector 14. audio connector
15. Displayport connector 16. HDMI-out connector
17. HDD/ODD power connector 18. Side keyboard connector
19. optical-drive connector 20. heatsink
21. power connector 22. processor fan connector
Installing the system board
1. Place the system board on the computer.
2. Connect all the cables to the system board.
3. Tighten the screws to secure the system board to the base panel.
4. Connect the optical-drive cable and hard-drive cable to the system and thread the cables through
the retention clips.
5. Install:
a.
processor fan
b. converter board
c. power-supply unit
d. heatsink
e. hard drive
f. optical drive
g. memory
h. system-board shield
i. VESA mount bracket
j. cable cover
k. speaker cover
l. back cover
m. stand
6. Follow the procedure in After Working Inside Your Computer.
34
To Next Page
Loading...
