Dell OptiPlex 380 - Detailed Engineering Specifications; System Dimensions (Physical); System Board Connector Maximum Allowable Dimensions

DELL™ OPTIPLEX™ 380 TECHNICAL GUIDEBOOK
17
Detailed Engineering Specifications
System Dimensions (Physical)
NOTE: System Weight* and Shipping Weight* is based on a typical configuration and may vary based on
PC configuration. A typical configuration includes: integrated graphics, one hard drive, and one optical
drive.
MT
DT
SFF
Chassis Volume liters
33
16
10.7
Chassis Weight* kilograms/pounds
12 / 26.5
9 / 19.8
7 / 15.4
Chassis Dimensions: (HxWxD)
Height inches/centimeters
16.1 / 40.8
4.5 / 11.4
3.7 / 9.3
Width inches/centimeters
7.4 / 18.7
15.7 / 39.9
12.4 / 31.4
Depth inches/centimeters
17.0 / 43.3
13.9 / 35.3
13.4 / 34.0
Shipping Weight* kilograms/pounds includes packaging materials
19.7 / 43.5
12.7 / 28.0
9.7 / 21.3
Packaging Parameters (HxWxD)
Height inches/centimeters
22.38 / 56.8
20.63 / 52.4
20.88 / 50.04
Width inches/centimeters
22.25 / 56.5
20.31 / 51.6
19.38 / 49.23
Depth inches/centimeters
14.25 / 36.2
11.75 / 29.8
10.63 / 27
System Board Connector Maximum Allowable Dimensions
MT
DT
SFF
PCI Slot(s) Dimensions: (HxL)
2
2
1
Height inches/centimeters
4.376/11.115
2.731/6.89
Length inches/centimeters
6.6/16.765*
6.6/16.765
PCIe x16 Slot Dimensions: (HxL)
1
1
1
Height inches/centimeters
4.376/11.115
2.731/6.89
Length inches/centimeters
6.6/16.765*
6.6/16.765
Risers: (PCI riser card will replace two PCI slots and Combo riser card will replace one PCI and one PCIe slots.)
Combo Full Height Riser with 1 PCI and 1 PCIe connector (HxL)
1
Height inches/centimeters
4.376/11.115