Dell OptiPlex 380 - Heat Sink and Processor Replacement; Heat Sink and Processor Removal and Installation

DELL™ OPTIPLEX™ 380 TECHNICAL GUIDEBOOK
21
Communications – Integrated LAN
Integrated Broadcom57780 Gigabit
1
LAN
MT
DT
SFF
Connector Type
RJ-45
Data Rates supported
10/100/1000M
Controller Details
Controller bus architecture (example PCIe 1.0a x1)
PCIe V1.1 x 1
Integrated memory
Yes (buffer memory)
Data transfer mode (example Bus-Master DMA)
DMA
Power consumption (full operation per data rate
connection speed)
814mW(1000BASE-T) / 450mW(100BASE-T) /
359mW(10BASE-T)
Power consumption (standby operation)
30 mW
IEEE standards compliance (example 802.1P)
IEEE802.3, IEEE802.3u, IEEE802.3x
Hardware Certifications (example FCC, B, GS mark…)
IEEE
Boot ROM Support
Yes
Network Transfer Mode (example Full Duplex, Half Duplex)
Full Duplex/Half Duplex
Network Transfer Rate
10BASE-T (half-duplex) 10 Mbps
10BASE-T (full-duplex) 20 Mbps
100BASE-TX (half-duplex) 100 Mbps
100BASE-TX (full-duplex) 200 Mbps
1000BASE-T (full-duplex) 2000 Mbps
Depends on the system environment.
Environmental
Operating temperature
0 to 70°C
Operating humidity
NA
Operating System Driver Support
Windows XP, Windows Vista , Windows 7 (32bit/64bit),
Ubuntu (for China Only)
Manageability (examples WOL, PXE..)
WoL, PXE
Management Capabilities Alerting (examples ASF 2.0
AMT…)
1
This term does not connote an actual operating speed of 1 Gb/sec. For high speed transmission, connection to a Gigabit Ethernet
server and network infrastructure is required.