Option Description
• COM 4
SATA Operation Allows you to configure the operating mode of the integrated hard drive
controller.
• Disabled = The SATA controllers are hidden
• ATA = SATA is configured for ATA mode
• RAID ON = SATA is configured to support RAID mode
Drives Allows you to enable or disable the various drives on-board:
• SATA-0
• SATA-1
• SATA-2
• SATA-3
Smart Reporting This field controls whether hard drive errors for integrated drives are
reported during system startup. This option is disabled by default.
USB Configuration Allows you to enable or disable the integrated USB controller for:
• Enable Boot Support
• Enable Front USB Ports
• Enable Rear USB Ports
All the options are enabled by default.
Front USB Configuration Allows you to enable or disable the front USB ports. All the ports are enabled
by default.
Back USB Configuration Allows you to enable or disable the back USB ports. All the ports are enabled
by default.
USB PowerShare This option allows you to charge the external devices, such as mobile
phones, music player. This option is disabled by default.
Audio Allows you to enable or disable the integrated audio controller.
• Enable Microphone
• Enable Internal Speaker
Both the options are enabled by default.
Miscellaneous Devices Allows you to enable or disable the various on-board devices.
• Enable PCI Slot
• Enable Media Card (default option)
• Disable Media Card
.
Table 7. Video
Option Description
Primary Display Allows you to select the primary display when multiple controllers are
available in the system.
• Auto
41
To Next Page
Loading...
