Installing the system fan
1. Connect the speaker cable and system fan cable to the connectors on the system board.
2. Place the system fan on the computer and slide the system fan until it clicks into place.
3. Install the cover.
4. Follow the procedure in After Working Inside Your Computer.
Removing the memory module
1. Follow the procedure in Before Working Inside Your Computer.
2. Remove the:
a. cover
b. system fan
3. Pull the securing clips from the memory module until the memory module pops up.
4. Remove the memory module from the socket on the system board.
Installing the memory module
1. Align the notch on the memory module with the tab on the memory module connector.
2. Insert the memory module into the memory module socket and press it until it clicks into place.
3. Install the:
a. system fan
b. cover
4. Follow the procedure in After Working Inside Your Computer.
10
To Next Page
Loading...
