Dell OptiPlex 7040M - Page 26

Option Description
Advanced Boot Options Allows you to select the Enable Legacy Option ROMs option, when in UEFI boot mode. By
default, this option is enabled.
Date/Time Allows you to set the date and time settings. Changes to the system date and time take eect
immediately.
Table 6. System Conguration
Option Description
Integrated NIC Allows you to control the on-board LAN controller. The options are:
• Disabled
• Enabled
• Enabled w/PXE (default)
• Enabled w/Cloud Desktop
NOTE: Depending on the computer and its installed devices, the items listed in this
section may or may not appear.
WIDI Allows you to connect to display through WiFi. WIDI requires Intel WiFi card, Intel graphics, and
WIDI receiver in display (or WIDI compliant display). To install the WIDI application, see the
dell.com/support site to download the WIDI application.
NOTE: When installing the WIDI application, connect the display to Intel on-board
graphic output.
SATA Operation Allows you to congure the operating mode of the integrated hard drive controller.
• Disabled = The SATA controllers are hidden
• ATA = SATA is congured for ATA mode
• RAID ON = SATA is congured to support RAID mode
Drives Allows you to enable or disable the various drives on-board:
• SATA-0 (enabled by default)
Smart Reporting This eld controls whether hard drive errors for integrated drives are reported during system
startup. This option is disabled by default.
USB Conguration Allows you to enable or disable the integrated USB controller for:
• Enable Boot Support
• Enable Front USB Ports
• Enable Rear USB Ports
All the options are enabled by default.
Front USB Conguration Allows you to enable or disable the front USB ports. All the ports are enabled by default.
Back USB Conguration Allows you to enable or disable the back USB ports. All the ports are enabled by default.
USB PowerShare This option allows you to charge the external devices, such as mobile phones, music player. This
option is disabled by default.
Audio Allows you to enable or disable the integrated audio controller.
• Enable Microphone
• Enable Internal Speaker
Both the options are enabled by default.
Miscellaneous Devices Allows you to enable or disable the various on-board devices.
• Enable Media Card (default option)
• Disable Media Card
26