NOTE: You may need a plastic scribe to release the cover from the edges.
Installing cover
Steps
1. Place the cover on the computer.
2. Slide the cover toward the back of the computer to install it.
3. Tighten the thumbscrew to secure the cover to the computer.
4. Follow the procedure in After working inside your computer.
Coin-cell battery
Removing coin cell battery
Steps
1. Follow the procedure in Before working inside your computer.
2. Remove the cover.
3. To remove the coin cell battery:
a. Press the release latch until the coin cell battery pops out [1].
b. Remove the coin cell battery from the system board [2].
12
Disassembly and reassembly
To Next Page
Loading...
