4. Install the Side cover.
5. Follow the procedure in After working inside your computer.
Hard drive
Removing the hard drive
NOTE: For configurations shipped with 3.5-inch HDD, follow the same procedure to remove the HDD from its bracket.
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. Side cover
b. hard drive assembly
3. Flex the hard drive bracket [1], lift the hard drive [2], and then slide out from the hard drive bracket [3].
NOTE: Follow the same procedure to remove another 2.5-inch hard drive on the other side of the bracket.
Removing and installing components 25
To Next Page
Loading...
