4. Follow the procedure in After working inside your computer.
Hard drive and optical drive module
Removing the hard drive and optical drive module
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. Side cover
b. Front bezel
c. HDD assembly
3. To release the hard drive and optical drive module:
a. Unroute the optical drive cables [1] and hard drive cables [2] through the retention clip and HDD-ODD release tab
respectively.
b. Slide the release tab to unlock the hard drive and optical module [1].
c. Lift the hard drive and optical module [2]
28
Removing and installing components
To Next Page
Loading...
