Dell OptiPlex 9010 - Page 27

DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
27
COMMUNICATIONS – SERIAL / PARALLEL PORT PCIE ADD-IN CARD
NOTE: MT supports full height (FH) cards and DT and SFF supports low profi le (LP) cards.
SERIAL / PARALLEL PORT PCIE ADD-IN CARD
MT DT SFF USFF
Connector Type RS-232 and IEEE1284
Data Rates supported
50bps ~115.2Kbps(Serial)&Maximum 1.8MBp(Parallel)
Controller Details
Controller bus architecture (example PCIe 1.0a x1) PCI Express one lane (x1)
Driver Support
Microsoft Client XP/Vista/ Win 7 (32bit/64bit)
Linux
DOS
Full height Serial / Parallel add-in card
Environment
Operation Temperature 0°C to 60°C (32°F to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20°C to 85°C (-4°F to 185°F)
Optional
COMMUNICATIONS – SERIAL PORT PCIE ADD-IN CARD
NOTE: MT supports full height (FH) cards and DT and SFF supports low profi le (LP) cards.
SERIAL PORT PCIE ADD-IN CARD
MT DT SFF USFF
Connector Type RS-232
Data Rates supported 50bps ~115.2Kbps
Controller Details
Controller bus architecture (example PCIe 1.0a x1) PCI Express one lane (x1)
Driver Support
Microsoft Client XP/Vista/Win 7 (32bit/64bit)
Linux
DOS
Half height Serial add-in card
Environment
Operation Temperature 0°C to 60°C (32°F to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20°C to 85°C (-4°F to 185°F)
Optional