Dell OptiPlex 9010 - System Setup; Boot Sequence

DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
45
BIOS DEFAULTS
System Configuration
Integrated NIC: Enable w/PXE
Serial Port: COM1
SATA Operation: RAID On
Drives: Enable (SATA-0, SATA-1, SATA-2, SATA-3)
SMART Reporting: Disable
USB Configuration:
Enable (Boot Support, Front USB Ports, Rear
Dual USB Ports, Rear Quad USB Ports)
Miscellaneous Devices: Enable (PCI Slot)
Video
Multi-display: Disable (For system with discrete graphics)
Security
Strong Password: Disable
Password Configuration: 4~32
Password Bypass Disable
Password Changes: Enable
TPM Security: Disable
Computrace®: Deactivate
CPU XD Support: Enable
OROM Keyboard Access Enable
Admin Setup Lockout Disable
Chassis Intrusion
Disable (For system with Chassis Intrusion
detection)
Performance
Multiple Core Support: All
Intel® SpeedStep™: Enable
C States Control: Enable
Intel TurboBoost Enable
HyperThread control: Enable
HDD Protection Support Enable (For China market only)
CPU XD Support: Enable
Power Management
AC Recovery: Power O
Auto On Time: Disable
Deep Sleep Control: Disable
Fan Control Override: Disable
Wake on LAN/WLAN: Disable
Block sleep Disable
POST Behavior
Numlock LED: Enable
Keyboard Errors: Enable
POST HotKeys: Enable
Virtualization Support
Virtualization: Enable
VT for Direct I/O: Enable
Trusted Direct I/O Disable
Maintenance
Service Tag: Set by the factory
Asset Tag: Optional User Entry
SERR Message: Enable
USB Wake Support Disable