Need help?Do you have a question about the Dell OptiPlex 9010 Small Form Factor and is the answer not in the manual?
General| RAM | Up to 16 GB DDR3 |
|---|---|
| Memory Slots | 4 DIMM slots |
| Storage | Up to 2 TB HDD or 256 GB SSD |
| Power Supply | 240W |
| Form Factor | Small Form Factor |
| Processor | Intel Core i3, i5, or i7 (3rd Generation) |
| Chipset | Intel Q77 Express Chipset |
| Graphics | Integrated Intel HD Graphics or optional discrete GPU |
| Audio | Integrated HD audio |
| Network | Integrated Gigabit Ethernet |
| Ports (Front) | 4 USB 2.0 |
| Ports (Rear) | RJ-45, Serial, VGA, DisplayPort |
| Expansion Slots | 1 PCIe x16, 1 PCIe x1 |
| Operating System | Windows 7, Windows 8, Windows 10 |
| Optical Drive | DVD-ROM, DVD+/-RW |
Use safety guidelines to protect your computer and ensure personal safety.
Instructions for shutting down Windows 8 and Windows 7 operating systems.
Steps to reconnect external devices, cards, and cables before powering on.
Lists the tools required for component removal and installation procedures.
Step-by-step guide to remove and reinstall the computer cover.
Procedures for removing and installing the front bezel from the computer.
Steps to remove and install the Wireless Local Area Network (WLAN) card.
Procedures for removing and installing the drive cage from the computer.
Steps to remove and install the optical drive from the computer.
Procedures for removing and installing the hard drive from its bracket.
Procedures for removing and installing the intrusion switch.
Steps to remove and install an expansion card from the system board.
General guidelines for configuring system memory for optimal performance.
Procedures for removing and installing memory modules from the system board.
Steps to remove and install the coin-cell battery from its socket.
Procedures for removing and installing the system fan from the chassis.
Steps to remove and install the speaker from the computer.
Procedures for removing and installing the power-switch cable.
Steps to remove and install the I/O panel from the chassis.
Procedures for removing and installing the power supply unit from the computer.
Procedures for removing and installing the heat sink assembly.
Steps to remove and install the processor from its socket.
Procedures for removing and installing the system board from the chassis.
Diagram and list of components on the system board.
Accessing System Setup, boot menu, and understanding navigation keys.
Details about system information, boot list options, and boot sequence.
Settings for NIC, Serial Port, SATA Operation, Drives, SMART, USB.
Information on passwords, Secure Boot, TPM, and other security settings.
Settings for processor cores, SpeedStep, Turbo Boost, and power options.
Recommended steps to update the BIOS and information on jumper settings.
How to run comprehensive hardware diagnostics before booting the OS.
Interpreting power LED blinking schemes and computer beep codes for troubleshooting.
List of common error messages and their descriptions for troubleshooting.
Details on processor types, memory, and video capabilities.
Specifications for audio, network, system chipset, and expansion bus.
Details on external/internal connectors, drive bays, and power supply specifications.
Information on physical dimensions and environmental operating conditions.
To Next Page