Dell OptiPlex 9010 Small Form Factor User Manual

4. Pull the release lever away from the expansion card until you release the securing tab from the dent in the card.
Then, ease the card up and out of its connector and remove it from the computer.
Installing The Expansion Card
1. Insert the expansion card into the connector on the system board and press down to secure it in place.
2. Install the:
a. front bezel
b. cover
3. Follow the procedures in After Working Inside Your Computer .
19

Dell OptiPlex 9010 Small Form Factor Specifications

General

Brand	Dell
Model	OptiPlex 9010 Small Form Factor
Category	Desktop
Language	English