Dell OptiPlex 9010 - Communications

DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
28
COMMUNICATIONS – SERIAL / PARALLEL PORT PCIE ADD-IN CARD
NOTE: MT supports full height (FH) cards and DT and SFF supports low profi le (LP) cards.
PARALLEL PORT PCIE ADD-IN CARD
MT DT SFF USFF
Connector Type IEEE1284
Data Rates supported
Maximum 1.8MBp
Controller Details
Controller bus architecture (example PCIe 1.0a x1) PCI Express one lane (x1)
Driver Support
Microsoft Client XP/Vista/7 (32bit/64bit)
Linux
DOS
Half height
parallel add-in card
Environment
Operation Temperature 0°C to 60°C (32°F to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20°C to 85°C (-4°F to 185°F)
Optional