Dell OptiPlex 980 — Desktop - Heat Sink and Processor Removal and Replacement; Removing the Heat Sink and Processor

Back to Contents Page
Heat Sink and Processor
Dell™ OptiPlex™ 980 Service Manual—Desktop
WARNING: Before working inside your computer, read the safety information that shipped with your
computer. For additional safety best practices information, see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
Removing the Heat Sink and Processor
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the expansion card riser
.
3. Disconnect the fan connector from the system board.