Back to Contents Page
System Board
Dell™ OptiPlex™ 980 Service Manual—Desktop
WARNING: Before working inside your computer, read the safety information that shipped with your
computer. For additional safety best practices information, see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
Removing the System Board
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the optical drive
.
3. Remove the heat sink and processor
.
4. Remove the wireless module
5. Remove the memory
6. Remove the expansion card riser.
7. Disconnect all the cables on the system board.
To Next Page
Loading...
