Dell OptiPlex 980 — Desktop - Front Thermal Sensor Removal and Replacement; Removing the Front Thermal Sensor

Back to Contents Page
Front Thermal Sensor
Dell™ OptiPlex™ 980 Service Manual—Desktop
WARNING: Before working inside your computer, read the safety information that shipped with your
computer. For additional safety best practices information, see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
Removing the Front Thermal Sensor
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the processor fan
.
3. Disconnect the front thermal sensor cable from the system board.