Engineering specifications
Physical system dimensions
The following table provides the physical dimensions of your OptiPlex All-in-One Plus 7410.
NOTE: System weight and shipping weight are based on a typical configuration and may vary based on your system
configuration. A typical configuration includes integrated graphics, one hard drive, and one optical drive.
Table 21. Physical system dimensions
Feature Values
Non-touch chassis dimensions (system without stand)
Height 354.3 mm (13.95 in.)
Width 540 mm (21.26 in.)
Depth 57.9 mm (2.28 in.)
Maximum weight 6.76 kg (14.90 lb)
Minimum weight 6.33 kg (13.95 lb)
Touch chassis dimensions (system without stand)
Height 354.3 mm (13.95 in.)
Width 540 mm (21.26 in.)
Depth 57.90 mm (2.28 in.)
Maximum weight 6.76 kg (14.90 lb)
Minimum weight 6.33 (13.95 lb)
Basic fixed stand dimensions
Height 224 mm (8.82 in.)
Width 234 mm (9.21 in.)
Depth 179.70 mm (7.07 in.)
Weight 1.90 kg (4.18 lb)
Height adjustable stand dimensions
Height 366 mm (14.41 in.)
Width 288 mm (11.34 in.)
Depth 220 mm (8.66 in.)
Weight 2.87 kg (6.32 lb)
Height adjustable stand with optical disk drive dimensions
Height 374.6 mm (14.75 in.)
Width 313.8 mm (12.35 in.)
Depth 240 mm (9.45 in.)
Weight 2.33 kg (5.15 lb.)
3
Engineering specifications 23