Dell OptiPlex All-in-One Plus 7410 - Back Cover Removal and Installation

Power ratings
The following table lists the power ratings specifications of your OptiPlex All-in-One Plus 7410.
Table 42. Power ratings specifications
Description Values
Type 160 W (80 PLUS Bronze) 240 W (80 PLUS Platinum)
Diameter (connector) Not supported Not supported
Input voltage 90 VAC to 264 VAC 90 VAC to 264 VAC
Input frequency 47 Hz to 63 Hz 47 Hz to 63 Hz
Input current (maximum) 3.60 A 3.60 A
Output current (continuous)
● +19.50 VA/7.50 A
● +19.50 VB/7 A
Standby mode:
● +19.50 VA/0.50 A
● +19.50 VB/1.75 A
● +19.50 VA/8 A
● +19.50 VB/9 A
Standby mode:
● +19.50 VA/0.50 A
● +19.50 VB/1.75 A
Rated output voltage
● +19.50 VA
● +19.50 VB
● +19.50 VA
● +19.50 VB
BTUs/h (based on PSU max
wattage)
546 750
Active PFC
APFC Power Supply is offered with OptiPlex All-in-One Plus 7410.
Temperature range
Operating 5°C to 42°C (41°F to 107°F) 5°C to 42°C (41°F to 107°F)
Storage -40°C to 70°C (-40°F to 158°F) -40°C to 70°C (-40°F to 158°F)
Compliance
Erp Lot6 Tier 2 requirement Yes Yes
80Plus compliant Yes Yes
Energy Star 8.0 compliant Yes Yes
GS mark compliant Yes Yes
FEMP Standby Power
Compliant
Yes Yes
Thermal dissipation
The following table lists the thermal dissipation of your OptiPlex All-in-One Plus 7410.
Table 43. Thermal dissipation
Power supply unit Heat dissipation Voltage
160 W (80 Plus Bronze) 546 BTU/hr 100 VAC–240 VAC, 50 Hz–60 Hz, 3.6
A/1.8 A
240 W (80 Plus Platinum) 750 BTU/hr 100 VAC–240 VAC, 50 Hz–60 Hz, 3.6
A/1.8 A
Engineering specifications 41