Dell OptiPlex GX745 - Page 104


4. Attach the power and data cables to the floppy drive or Media Card Reader.

5. Replace the computer cover (see Replacing the Computer Cover).

6. Enter system setup (see Entering System Setup), and use the Diskette Drive option to enable your new floppy drive.

7. Verify that your computer works correctly by running the Dell Diagnostics (see Dell Diagnostics).
Optical Drive



Removing an Optical Drive

1. Follow the procedures in Before You Begin.
1
floppy drive or Media Card Reader
2
shoulder screws (4)
3
shoulder screw slots (2)
1
power cable
2
data cable
3
floppy-drive connector (DSKT)
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before replacing the cover.