NOTE: The palm-rest and keyboard assembly consists of the following components:
● Palm rest
● Keyboard
● Wireless antenna (2)
Next steps
1. Install the touchpad
2. Install the power button with optional fingerprint reader.
3. Install the power-button board.
4. Install the power-adapter port.
5. Install the system board
NOTE: The system board can be removed and installed with the M.2 solid-state drive, memory module, and heat sink
attached.
6. Install the speakers (tweeters).
7. Install the speakers (woofers).
8. Install the display assembly.
9. Install the left fan and the right fan.
10. Install the battery.
11. Install the wireless card.
12. Install the base cover.
13. Follow the procedure in After working inside your computer.
84
Removing and installing Field Replaceable Units (FRUs)
To Next Page
Loading...
