What does Amber/White 2-4 blinking pattern mean on Dell P152G002?
If your Dell Laptop displays a blinking amber/white pattern of 2-4, it indicates a memory failure. To resolve this, replace the system board.
What to do if a Dell Laptop has a Memory/RAM failure?
If your Dell Laptop experiences a memory/RAM failure, try resetting and swapping the memory modules among the slots. If this doesn't resolve the issue, replace the memory module.
How to fix error code [2,7] on Dell P152G002 Laptop?
If your Dell Laptop shows error code [2,7], the display cable may not be connected properly. Check to ensure the display cable is properly connected.
What to do if Dell P152G002 shows error code [2,8]?
If your Dell Laptop displays error code [2,8], it indicates a failure on the LCD power rail of the system board. To resolve this, replace the system board.
What to do if my Dell P152G002 battery is swollen?
If you notice that your Dell Laptop battery is swollen, immediately discontinue using the laptop. Discharge it by disconnecting the AC adapter and allowing the battery to drain. Replace the swollen battery and make sure you dispose of it properly. You can also contact Dell product support to explore options for replacing the swollen battery under your warranty or service contract.
What to do if Dell P152G002 Laptop shows Amber/White 1-4 blinking pattern?
If your Dell Laptop shows a blinking amber/white pattern of 1-4, it indicates a hinge cable OCP diagnostic issue for the LCD and camera power. Try reassembling the hinge cable. If the problem persists, replace the hinge cable with a new one.
What does it mean if my Dell P152G002 has LCD Power rail failure (error code [2,8])?
If your Dell Laptop is experiencing an LCD Power rail failure, this is due to a failure on the LCD power rail of the system board, and the suggested solution is to replace the system board.
Why does my Dell P152G002 show a blinking Amber/White 1-1 pattern?
If your Dell Laptop displays a blinking amber/white pattern of 1-1, it indicates that an unsupported (non-Dell) battery is being used. To resolve this, replace the battery with a new, supported battery.
What to do if a Dell P152G002 Laptop LCD failure (EC detection of power rail failure)?
If your Dell Laptop's LCD fails due to EC detection of power rail failure, replace the system board.
How to fix LCD failure (SBIOS message) on a Dell P152G002 Laptop?
To fix an LCD failure indicated by an SBIOS message on your Dell Laptop, replace the LCD module.
General| Model | P152G002 |
|---|---|
| Category | Laptop |
| Operating System | Windows 10 Pro |
| Display | 15.6-inch, 1920x1080 |
| Battery | 4-cell lithium-ion |
To Next Page
