Operating the monitor │ 87
When the monitor goes into Standby mode, the following message appears:
Activate the computer and wake up the monitor to gain access to the OSD.
The OSD functions only in the normal operation m
ode. If you press the joystick
during the Standby mode, the following message will appear depending on the
selected input:
Activate the computer and the monitor to gain access to the OSD.
NOTE: The message may be slightly different according to the
connected input signal.
If USB-C, DisplayPort, or HDMI input is selec
ted and the corresponding cable is not
connected, the following message will appear:
or
NOTE: The message may be slightly different according to the selected
input signal.
See Trou b l esh ooting for more information.
To Next Page
Loading...
