Operating the Monitor | 53
Icon Menu and
Submenus
Description
Input Source Selects between different video inputs that are connected
to your monitor.
Exit
32 Monitor
Display
Menu
Input Source
Color
Personalize
Others
Brightness/Contrast
DP
HDMI
Auto Select
Auto Select for USB-C
Rename Inputs
Reset Input Source
On
Prompt for Multiple Inputs
USB-C 90W
USB-C 90W
USB-C 90W
Select USB-C 90W input when you are using the
USB-C 90W connector. Press the Joystick button to
confirm the selection.
DP Select DP input when you are using the DP (DisplayPort)
connector. Press the joystick button to confirm the
selection.
HDMI Select HDMI input when you are using the HDMI
connector. Press the joystick button to confirm the
selection.
Auto Select Allows you to scan for available input sources.
Press to select this function.
Auto Select for
USB-C
Press to select these function.
•Prompt for Multiple Inputs: always show Switch to
USB-C Video Input message for user to choose whether
to switch or not.
•Yes: The monitor always switch to USB-C video without
asking while USB-C connected.
•No: The monitor will NOT auto switch to USB-C video
from another available input.
Rename Inputs Allows you to Rename Inputs.
Reset Input
Source
Resets your monitor’s Input Source settings to the factory
defaults.
Press to select this function.
To Next Page
Loading...
