66 | Operating the Monitor
Initial Setup
When you select OSD items of Factory Reset in Other feature, the following message
will appear:
Are you sure you want to reset to default settings ?
1. Disconnect all USB storage devices plugged into the monitor.
2. Select ‘Yes’ to continue.
Yes
No
When you select ‘Yes’to reset to default settings, the following message will appear:
32 Monitor
Select ‘Yes’ to enable the following function(s):
.
Always on USB-C Charging
.
Other USB Charging
When ‘Yes’ is selected, power consumption will
increase. When ‘No’ is selected, it will comply
with ENERGY STAR requirements.
Individual settings of the functions can be
changed in the Menu.
Yes
No
To Next Page
Loading...
