32 | Setting Up the Monitor
Connecting Your Monitor
WARNING: Before you begin any of the procedures in this section, follow
the Safety Instructions.
To connect your monitor to the computer:
1. Turn off your computer.
2. Connect the HDMI, DP or USB-C cable from your monitor to thecomputer.
3. Turn on your monitor.
4. Select the correct input source from the OSD Menu on your monitor and then
turn on your computer.
NOTE: P3223QE default setting is DP 1.4. A DP 1.1 Graphic card may not
display normally.
Connecting the HDMI Cable
HDMI
HDMI
To Next Page
Loading...
