Dell P51F - Replacing the Display Cable; Procedure; Post-Requisites

Replacing the display cable
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Route the display cable through the routing guides on the display back-
cover.
2 Route the camera cable through the routing guides on the display back-
cover.
3 Adhere the tape that secures the camera cable to the display back-cover.
4 Connect the camera cable to the connector on the camera module.
Post-requisites
1 Replace the display hinges.
2 Replace the display panel.
3 Replace the display bezel.
4 Replace the display assembly.
5 Follow the procedure from step 3 to step 8 in ”Replacing the computer
base".
6 Replace the keyboard.
7 Replace the wireless card.
8 Replace the hard drive.
9 Replace the base cover.
10 Replace the optical drive.
11 Replace the battery.
87