Dell P54G - Removing the Palm-Rest Assembly; Prerequisites

Removing the palm-rest
assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the base cover.
2 Remove the battery.
3 Remove the wireless card.
4 Remove the speakers.
5 Remove the coin-cell battery.
6 Remove the battery-status light cable.
7 Remove the touchpad.
8 Remove the I/O-board cable.
9 Remove the I/O board.
10 Remove the display assembly.
11 Remove the heat sink.
12 Remove the system board.
13 Remove the fan.
14 Remove the keyboard.
87