Replacing the keyboard
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Slide the keyboard cable into the system-board connector and close the latch to
secure the cable.
2 Turn the keyboard over, slide the tabs on the keyboard into the slots on the palm-
rest assembly, and snap the keyboard into place.
Post-requisites
Replace the battery.
26
To Next Page
Loading...
