Table 20. System setup options—System information menu (continued)
Overview
DIMM A Size Displays the memory configuration of DIMM A.
DIMM B Size Displays the memory configuration of DIMM B.
DEVICES
Panel Type Displays the Panel Type of the computer.
Video Controller Displays the integrate graphics information of the computer.
Video Memory Displays the video memory information of the computer.
Wi-Fi Device Displays the Wi-Fi device installed in the computer.
Native Resolution Displays the native resolution of the computer.
Video BIOS Version Displays the video BIOS version of the computer.
Audio Controller Displays the audio controller information of the computer.
Bluetooth Device Displays whether a Bluetooth device is installed in the computer.
LOM MAC Address Displays the MAC address of the LAN on Motherboard (LOM)
Table 21. System setup options—Boot Configuration menu
Boot Configuration
Boot Sequence
Boot Mode: UEFI only Displays the boot mode of this computer.
Boot Sequence Specifies the order that the BIOS searches the list of devices to find an
operating system to boot.
By default, ONBOARD NIC (IPV4) is selected
By default, ONBOARD NIC (IPV6) is selected
By default, UEFI Hard Drive is selected
Secure Boot
Enable Secure Boot Enables secure boot using only validated boot software.
Default: OFF
Secure Boot Mode Modifies the behavior of Secure Boot to allow evaluation or enforcement of
UEFI driver signatures. Deployed Mode should be selected for normal operation
of Secure Boot.
By default, Deployed Mode is selected.
Expert Key Management
Enable Custom Mode Allows the PK, KEK, db, and dbx security key databases to be modified.
Default: OFF
NOTE: If Custom Mode is not enabled, any changes made with respect to
the keys will not be saved.
Custom Mode Key Management Allows for selection of key database.
● Save to File will save the key to a user-selected file.
● Replace from File will replace the current key with a key from a user-
selected file.
● Append from File will add a key to the current database from a user-
selected file.
● Delete will delete the selected key.
● Reset All Keys will reset all four keys to their default settings.
By default, PK security key database is selected.
System setup 93
To Next Page
Loading...
