124 Device Security
Example 2: Show MAB Configuration
To show the MAB configuration for interface 1/5, use the following command:
console#show dot1x ethernet 1/g5
Administrative Mode............... Enabled
Port Admin Oper Reauth Reauth
Mode Mode Control Period
------- ------------------ ------------ -------- ----------
1/g5 mac-based Authorized TRUE 300
Quiet Period................................... 60
Transmit Period................................ 30
Maximum Requests............................... 2
Max Users...................................... 16
Supplicant Timeout............................. 30
Server Timeout (secs).......................... 30
MAB mode (configured).......................... Enabled
MAB mode (operational)......................... Enabled
Logical Supplicant AuthPAE Backend VLAN Username
Filter
Port MAC-Address State State Id
Id
------- ----------------- ------------ ----------- ----- --------
--------
64 0012.43D1.D19F Authenticated Idle 1
To Next Page
Loading...
