Need help?Do you have a question about the Dell PowerConnect 2708 and is the answer not in the manual?
General| Switching Capacity | 16 Gbps |
|---|---|
| Forwarding Rate | 11.9 Mpps |
| Jumbo Frame Support | Yes |
| Ports | 8 x 10/100/1000BASE-T |
| Management | Web-based management interface |
| Dimensions (W x D x H) | 11.0 x 6.9 x 1.7 in |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -40 to 70 °C |
| Relative Humidity | 10% to 90% (non-condensing) |
| Power Supply | 100-240V AC, 50/60Hz |
| MAC Address Table Size | 8K MAC addresses |
Describes the hardware configurations of PowerConnect switches, including port details.
Explains the front panel port descriptions for various PowerConnect models.
Explains the meaning of Power, Managed Mode, Fan, and Port LEDs.
Safety and operational precautions before installing the device.
Instructions for installing the switch in a rack, on a flat surface, or on a wall.
Steps for setting up the switch from its factory default state.
Setting switch information and configuring IP addresses via static or DHCP.
To Next Page
