Dell PowerConnect 2708 - Downloading Files from Server

55
Downloading Files From Server
The File Download page contains fields for downloading files from the TFTP server. To open the
page, click
File Download in the tree view.
Figure 6-8. File Download (PowerConnect 2708, 2716, and 2724 Switch Configuration)
TFTP Server IP Address — The TFTP Server IP Address from which files are downloaded.
Source File Name (1-64 Characters) — Specifies which file is downloaded.
Destination File — The destination file type to which the file is downloaded. The possible field
values are the following:
Software Image — Downloads the software image file.
Boot Code — Downloads the Boot file.
Downloading Files from Server
1 Open the File Download page.
2 Define the file type to download.
3 Define the fields on the page.
4 Click Apply Changes .
The software file is downloaded to the switch.
Downloading Files From Server
The File Download page contains fields for downloading files from the TFTP server. This applies
to PowerConnect 2748 switch configuration only.
To open the page, click File Download in the
tree view.