43
6
Configuring System Information
This section provides information for defining system parameters including switch status features,
downloading switch software, and modifying switch parameters.
Defining Switch Information
Viewing the Switch Status
The
Switch Status
page contains parameters for configuring and viewing general switch
information, including the Product Name, Firmware Version, the system MAC Address, Asset Tag,
Service Tag, System Name, Location Name, Serial Number, and System Up Time. To open the
page, click
Switch Status
in the tree view.
Figure 6-1. Switch Status
Product Name
— Defines the name of the product.
Firmware Version
— Defines the version of the product firmware.
Boot Version
— Displays the current boot version running on the device.
MAC Address
— Specifies the switch MAC address.
To Next Page
Loading...
