Dell PowerConnect 2708 - Defining VLAN Interface Settings

51
Blank — The interface is not a VLAN member. Packets associated with the interface are not
forwarded.
Show VLAN ID — Displays the list of the VLAN IDs as defined in the switch.
Create VLAN — Designates the ID of the particular VLAN defined.
VLAN Name — Defines a new VLAN in the switch.
Remove VLAN — Removes a selected VLAN from the switch.
Showing/Creating VLANs
1 Open the VLAN Membership page.
2 Select VLAN ID or Create VLAN field.
3 Click Apply Changes .
The switch
VLAN change is applied.
Removing VLANs
1 Open the VLAN Membership page.
2 Select the VLAN to be removed.
3 Click Apply Changes .
The
VLAN is removed from the switch.
Defining VLAN Interface Settings
The VLAN Interface Settings page displays the parameters, including Interface type, PVID, Frame
Type, and Ingress Filtering. To open the
page, click VLAN Interface Settings in the tree view.