24 System Firmware Version 3.2.0.6
Link Dependency Commands
Title Description
link-dependency group [ action { up | down } ] Use the action command to control the operational state of the group
based on the dependent links state.
• up — Causes the group members to change their operational
state to be opposite that of the dependent link.
• down — Causes the group members to change their
operational state to follow that of the dependent link.
Default: Not applicable.
Multicast
Title Description
ip pimdm mode
ip pimdm query-interval
show ip pimdm interface
PIM-DM commands not supported in the 3.2 release are documented in
the CLI Reference Manual.
User’s Guide Updates
Configuring Dell PowerConnect
Title Description
User’s Guide
See: Dell™ PowerConnect™ 6200 Series User’s Guide
Configuration Guide
See: Dell™ PowerConnect™ 6200 Series Configuration Guide
To Next Page
Loading...
