Dell PowerConnect 8024F User Manual

2.4 Configuration information
Your iSCSI SAN configuration requires several static IP addresses. Complete this form and have it
available for reference during the configuration.
IP addresses needed for configuration:
Host iSCSI
Initiator
Host #1 Host #2 Host #3 Host #4
Port 1
Port 2
Array Target
Array #1
Array #2
Array #3
Port 1
Port 2
Management
(Out-of-Band)
Array Group
Management IP
(Out-of-Band)
Array Group
Management IP
(In-Band)
Out-of-Band
Switch
Management Port
Switch admin password: _________________________
Array Group admin password: __________________________*
Array Group membership password: __________________________*
*These may be the same password – see the PS-series Group Administration guide for more
information.
http://psonlinehelp.equallogic.com/v5.1/groupmanager.htm

Dell PowerConnect 8024F Specifications

General

Brand	Dell
Model	PowerConnect 8024F
Category	Switch
Language	English