Software User’s ManualRev 1.00
12
Figure 11: getioinfo
The 10GbE PTM is listed by the system as “10Gb PT KR” "DELL 10GbE KR PTM".
10. Run the following command to connect to the 10GbE PTM
CLI:
# connect switch-3
Figure 12: 10GbE PTM Welcome Banner
11. Change privilege level if required. To login as an administrator, run the command
login admin
You are now connected to the 10GbE PTM and can start entering commands.
12. To show the list of available commands, run the command:
# help
To Next Page
Loading...
