Dell POWEREDGE 4300 - Page 57

Running the Dell Diagnostics 5-3
)LJXUH'LDJQRVWLFV0HQX
+RZWR8VHWKH'HOO'LDJQRVWLFV
When you select RuN Specific Tests from the DIAGNOSTICS menu, the main
screen of the diagnostics appears. Figure 5-2 shows a sample main screen; the actual
text on your system may vary depending on your system configuration.
Information on the main screen of the diagnostics is presented in the following four
areas:

Two lines at the top of the main screen identify the diagnostics and give its ver-
sion number.

On the left side of the screen, the Available Test Groups area lists the diagnos-
tic test groups in the order they will run if you select All under the Run submenu.
Press the up- or down-arrow key to highlight a test group.

On the right side of the screen, the System Configuration area lists the com-
puter’s current hardware settings.

Two lines at the bottom of the screen make up the Main Menu area. The first line
lists the menu options you can select; press the left- or right-arrow key to high-
light an option. The second line gives information about the highlighted option.
'HOO&RPSXWHU&RUSRUDWLRQ
'HOO3RZHU(GJH'LDJQRVWLFV9HUVLRQ
X.XX
Run All Tests
RUn Quick Tests
RuN Specific Tests
Exit
DIAGNOSTICS MENU