Dell POWEREDGE 4300 - Options

Running the Dell Diagnostics 5-7
To select all the subtests, press <Enter> when All is highlighted in the Select menu.
To select an individual subtest, highlight the subtest and press <Spacebar> or high-
light One and press <Enter>. Press the up- or down-arrow key to highlight a subtest
to be selected.
To reverse a subtest selection, highlight the subtest and press <Spacebar>. To clear
all selections, select Clear All.
Key-Help displays a list of key controls available. The Quit Menu option returns you to
the previous menu.
2SWLRQV8QGHU6XEWHVW
Options in the Subtest menu functions the same way as Options in the Main
Menu. For information on this option, see “Options” found later in this chapter.
7HVW/LPLWV8QGHU6XEWHVW
Test Limits
in the Subtest menu functions the same way as the Test Limits option in
the Main Menu. For information on this option, see “Test Limits” found later in this
chapter.
$ERXW8QGHU6XEWHVW
About in the Subtest menu displays information about the highlighted subtest.
.H\+HOS8QGHU6XEWHVW
Key-Help in the Subtest menu displays a list of key controls available.
4XLW0HQX8 QGHU6XEWHVW
Quit Menu in the Subtest menu returns you to the previous menu.
2SWLRQV
Table 5-1 lists all of the possible values for each global parameter of Options. A brief
description of each parameter follows the table. To change Options parameters,
press <Spacebar>, the left- and right-arrow keys, or the plus (+) and minus (–) keys.