Dell PowerEdge C6100 Getting Started With Your System

Getting Started With Your System 7
1 Align the end pieces of the rails on the vertical rack flanges to seat the
pegs in the bottom hole of the first U and the top hole of the second U.
Engage the back end of the rail until the latch locks in place.
NOTE: The rails can be used in both square-hole and round-hole racks.
2 Repeat step 1 to position and seat the front end piece on the vertical
flange.
NOTE: To remove the rails, pull on the latch release button on the end piece
midpoint and unseat each rail.
3 Slide the system into the rack.

Dell PowerEdge C6100 Specifications

General

Brand	Dell
Model	PowerEdge C6100
Category	Server
Language	English