118 Installing System Components
Figure 3-18. Installing and Removing an iDRAC6 Enterprise Card
7
If applicable, replace the expansion card. See "Installing an Expansion
Card" on page 94.
8
Close the system. See "Closing the System" on page 79.
9
Reconnect the system to its electrical outlet and turn the system on,
including any attached peripherals.
1 VFlash SD card 2 VFlash media slot
3 iDRAC6 Enterprise card connector 4 retention standoff posts (2)
5 iDRAC6 Enterprise card
R310HOM.book Page 118 Thursday, March 4, 2010 1:03 AM
To Next Page
Loading...
