Installing System Components 85
3 Press the release button and open the
hard-drive
carrier release handle to
release the
hard-drive carrier
. See Figure 3-6.
4
Slide the hard-drive carrier out of the hard-drive bay.
5
Insert a drive blank in the vacated hard-drive bay. See "Installing a Drive
Blank" on page 84.
CAUTION: To maintain proper system cooling, all empty hard-drive bays must
have drive blanks installed.
Figure 3-6. Removing and Installing a Hard-Drive Carrier
1 release button 2 hard-drive carrier handle
3 hard-drive carrier
R310HOM.book Page 85 Thursday, March 4, 2010 1:03 AM
To Next Page
Loading...
