Dell PowerEdge FX2 - Firmware and License Management

16 PowerEdge FX2 – FN I/O Module – VLT Deployment Guide | Version 2.2
Module Overview section, but it can also be launched by typing the management IP address of the
FN IOM into a browser with a port number of 8081, i.e. 172.25.189.209:8081
The FX2 CMC I/O Module Overview page (Figure 12) is the preferred method to launch the FN IOM
Dell Blade I/O Manager GUI. When the Launch I/O Module GUI button is clicked the login page
(Figure 13) will allow authorized users access to this feature-rich application.
FX2 CMC I/O module overview