Turning On The Enclosure
Figure 7. Turning on the Enclosure
Press the power button on the enclosure. The power indicator should light.
Turning On The Blades
Figure 8. Turning on a Blade
Press the power button on each blade, or power on the blades using the systems management software.
Complete The Operating System Setup
If you purchased a preinstalled operating system, see the documentation associated with the operating system. To
install an operating system for the first time, see the installation and configuration documentation for your operating
system. Be sure the operating system is installed before installing hardware or software not purchased with the system.
NOTE: See dell.com/ossupport for the latest information on supported operating systems.
7
To Next Page
Loading...
